#IVI DOOR LOCK TROUBLESHOOTING HOW TO#

The physical element of the device does the locking and the electrical element controls the clocking or unlocking.Įlectric locks are either failsafe (normally power is applied to maintain locked condition when power is removed the lock releases) or fail secure (no power applied the device is locked when power is applied, the device unlocks).įor diagnostic purposes, electric locking systems can be divided into three sections:

Do regular door alignment inspection to prevent issues with the lock.Most troubleshooting will be performed when you have completed the wiring and try to use the system or on a service call, where you have to determine why the door is not locking of unlocking.Įlectric locks are both mechanical as well as electrical.

Door closing too quickly? Adjust the screw.

Perform door inspection and check the following signs of malfunctioning:.

Apply battery backup power supply to individual door locks to solve power outages and enable 24/7 electricity supply. Measure the voltage at the lock point when the lock is in operation mode. Thinner cables are not sufficient to carry power all the way from the power source to the door lock.

Use cables that are wider than 0.2 mm.

Solve “the wobbly bolt” problem with testing and trying the right level of fitting. Choose surface-mounted overhead hydraulic closers of better quality. Use adequate hinges and pivots, the right painting for wooden doors, as well as the Loctite solution to take care of small bad fittings that can substantially affect the door locking power.

Ensure doors are hung on sturdy frames and well aligned, making sure the door fits the frame and that the door closer is not too tight or badly fitted.

Here are the main troubleshooting methods you can use to tackle the most common magnetic door lock points of failure: Common “failure to release” problems are associated with the power source, and the common “failure to lock: problems are associated with the door, including poorly hung door, the door frame getting warped, twisted or bowed, worn out tears and hinges or improperly installed door closers. The root problems of magnetic door locks explained above can disrupt the automatic door closer (an error of over 10mm is considered a serious malfunctioning problem) and limit the power supply to the magnetic lock from the source or because of improper cable installation. ‍Serious electricity malfunctioning is best left to professionals

Though you may want to leave certain troubleshooting issues to professionals, at times the answer to the question “How to fix a lock?” is as simple as replacing a worn out hinge, adjusting a screw or checking power efficiency. Despite taking care to make them sturdy and enduring, factors like costs often weigh in and can endanger the outside perimeter security when you least want it to. Time, weather, frequent use, inadequate operations, poor inspection and control, insufficient or unstable power supply, and lack of staff awareness are additional factors that impact their proper functioning. Since locks are attached to doors made out of materials such as wood, metal or plastic, using a number of adhesives and colors, many issues can arise in that area, and create problems with overall security. If you understand something about disassembling a door lock, you’ll get a clear idea that the sensitive release-lock mechanism can wear out quickly, especially if the budget for the access control unit is limited. They are also made of dozens of tiny parts, screws, hinges and magnets, including cabling with different width and length. Magnetic doors are made of various materials, for instance, they can contain iron, aluminum, zinc, copper or a combination of metals and alloys.

#IVI DOOR LOCK TROUBLESHOOTING HOW TO#

Apart from taking care to prevent unauthorized access by setting up a robust access control system, it’s useful to have basic knowledge of how to fix locks, if not for doing the job yourself, at least with the purpose to know when something is wrong and needs to be fixed. Once users and security staff get used to their convenience, magnetic door locks can be easily neglected, therefore enduring various malfunctions. Magnetic door locks are a versatile and an affordable access control mechanism for keeping unwanted visitors out of your premises.

Ivi door lock troubleshooting